Description
The µMAXBES solution is extremely compact, its size is only 115 x 95 x 30mm (237 gramm) and can be used as open frame solution or in a MIL housing with connectors of your choice. Supply power is 5–36VDC and uses less than 6W (8x 1Gbit copper links and 2x 10Gbit SFP+ fully operational). The product can be operated at -20°C to +60°C and optionally an extended temperature -40°C to +85°C version is available
For the fiber ports, most Ethernet compatible transceivers (acc. MSA) can be used. It allows the users to select the appropriate transceiver for each link. In the same size as the SFP+ carrier, a copper RJ45 carrier is available. The copper carrier support 100Mbit, 1Gbit, 2.5Gbit, 5Gbit and 10Gbit. The SFP+ carrier supports 1Gbit and 10Gbit SFP.
As managed switch, the product gives access to various switch settings to configure features like: Quality of Service, VLAN, Rapid Spanning Tree,… To adjust these switch settings, MPL provides an easy to use web interface.
µMAXBES Highlights
- Two 10Gbit ports to be used with SFP+ and copper
- Header versions
- Wide input 5-36VDC
- Fully manageable over Web interface or Telnet
- Copper or mixed copper/fiber versions
- Fanless operation
- IEEE802.1AS gPTP support
- Optionally CLI via USB
These features make the µMAXBES ideally suited for any rugged or industrial network applications. Due to the low power consumption, robust and flexible design, the products are well suited for any embedded system. It is the perfect fit, whether they are used in a rugged, hot or other harsh environment. The µMAXBES makes it easy to set up a challenging network!
Technical Features
| Board Key Data | ||
|---|---|---|
| Switch lookup Engine | High performance lookup engine supports up to 16k MAC entries IEEE 802.3x flow control, back pressure flow control |
|
| Status LED | 1 dual color LED for each copper port (Link, Activity and Speed indicators) 1 LED for each SFP (Link and Activity indicators) |
|
| External Status LED | All LED for remote indication are available over lockable header | |
| Interfaces | ||
| Ports | 8x 1Gbit copper, 2x 10Gbit ports for SFP+ and copper RJ45 | |
| Copper ports | Auto crossover (Auto MDI/MDIX) support, auto polarity correction, auto negotiation | |
| 10Gbit SFP ports (2x) | Supports all 10Gbit SFP+ and 1Gbit SFP which are MSA compliant and Ethernet compatible Support for direct attached cable SFP+ (DAC) Support for digital diagnostics monitoring |
|
| 10Gbit copper (2x) | Supports 100BASE-TX, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T | |
| Management Software | ||
| MPL developed and maintains a management SW with easy to use web interface. | ||
| Management supports: | • Accessible via https, Telnet or serial | • DHCP Client |
| • SNMPv1, v2c and v3 support | • Port Based VLAN | |
| • Switch statistic | • Quality of Service | |
| • IEEE 802.1Q VLAN | • IEEE 802.1D RSTP support | |
| • IEEE 802.1X MAC Address Checking | • Firmware Update via HTTP or TFTP | |
| • Port monitoring | • Trunking support | |
| • IGMPv3 support | • gPTP IEEE802.1AS | |
| Power | ||
| Input voltage | 5VDC- 36VDC Input range | |
| Power consumption | 6W fully operational with SFP+ module 9W fully operational with copper module |
|
| Environment | ||
| Storage Temperature | -45°C up to +85°C (-49°F to +185°F) | |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) at full operation -40°C to +85°C optional ( fiber version only) |
|
| Relative Humidity | 5% to 95% non condensing | |
| Standard Compliance | ||
| The µMAXBES is designed to meet or even exceed the most common standard Particular references are: | ||
| EMC | EN 55022, EN 55024, EN 61000, MIL-STD-461E | |
| Shock & Vibration | EN 60068 | |
| Environmental & Safety | EN 50155, MIL-STD-810-F, EN 60601, EN 60950 | |
| Approval List | CE, IEC 60945, IACS E10 | |
Packaging
| Chassis version | width x depth x height | comment |
| Open Frame | 115 x 95 x min. 30mm | custom cooling plate available |
Order Information
| µMAXBES-A8OH | Open Frame 10-port manageable Ethernet Switch with 8x 10/100/1000 copper ports on headers and 2x 10Gbit interfaces for SFP+ or copper carrier, all built on universal cooling plate, 8 -36VDC |
|
| µMAXBES-SFP1 | SFP+ 10Gbit carrier module (max 2 modules (SFP1 or RJ1) per µMAXBES) | |
| µMAXBES-RJ1 | RJ45 10Gbit copper module (max 2 modules (SFP1 or RJ1) per µMAXBES) | |
Accessories for the µMAXBES Family
| µPOWER-KIT1 | Power cable (10 cm) | |
| µSerLED-KIT1 | Multicolor LED panel PCB for all 10 ports, power, Reset and Status LED | |
| µCLI-KIT1 | CLI Interface for µMAXBES | |
| COAT-1 | Critical components are being bonded and coated | |
| XTEST-1 | Extended temperature test -40°C up to +85°C for the µMAXBES solutions (fiber configurations only) | |
