PowerDebug PRO Ethernet

Description

Extensions and Configuration

Thanks to the modularity concept of Lauterbach, the tools are designed around base modules which are universal and architecture-independent. PowerDebug PRO as a debug module will then be connected to the target via architecture-specific debug cables, which support over 80 microprocessor architectures in use in the embedded-market. The following picture shows the extensions of PowerDebug PRO and configuration examples.

Extensions

PowerTrace II

• 1, 2 or 4 GByte trace memory
• Universal trace module, connect to target via architecture-dependent trace probes (parallel or serial preprocessor)
• Maximum bandwidth of 19,2 GBit/s
• Fast trace upload to the host computer
• Support for parallel trace ports with up to 32-bit at 300 MHz DDR
• Support for serial trace ports, each lane max. 6.5 Gbit/s, but only up to 19,2 GBit/s in total
• Support for TRACE32 Streaming up to 180 MByte/s, compression allows higher data rates to be achieved
• PODBUS Express interface to PowerDebug PRO
• PODBUS and PODBUS Express interfaces to Logic Analyzer modules, e.g. PowerProbe, PowerIntegrator
• Additional independent 17 channel logic analyzer (with included Standard Probe)
• Energy Profiling (with optional Analog Probe)

PowerTrace Serial

• 4 GByte trace memory
• Universal module that is prelicensed for a trace protocol on delivery
• Additional trace protocol licenses can be added
• Up to 12.5 Gbit/s per channel
• Maximum bandwidth of 100 GBit/s
• Aurora-based trace protocols up to 8 RX lanes
• PCIe 3.0-based trace protocol up to 8 RX/TX lanes
• Reference-clock and bit-clock support
• Fast trace upload to the host computer
• Support for TRACE32 Streaming up to 180 MByte/s, compression allows higher data rates to be achieved
• PODBUS Express interface to PowerDebug PRO
• PODBUS and PODBUS Express interfaces to Logic Analyzer modules, e.g. PowerProbe, PowerIntegrator
• Additional independent 17 channel logic analyzer (with included Standard Probe)

Medium-speed Logic Analyzer (PowerProbe)

• Timing Analyzer up to 400 MHz
• State Analyzer up to 100 MHz
• 64 Input Channels
• Transient Recording
• Time Correlation with RISC Trace
• Clock Qualifier for State Clock
• Mixed State and Timing Mode
• 4 State Clock Inputs
• Optional FPGA Onchip Trace
• Optional Pattern Generator
• Protocol Support for CAN, USB, etc.

High-speed Logic Analyzer (PowerIntegrator)

• Timing Analyzer with 500 MHz on all Channels
• State Analyzer up to 200 MHz DDR
• 204 Input Channels
• Transient Recording
• Time Correlation with other Tracetools
• Clock Qualifier for State Clock
• Mixed State and Timing Mode
• 4 Clock Inputs
• MICTOR and Standard Probes (single ended)
• MICTOR differential Probes
• Analog Voltage and Current Probe
• 3G/DigRF Protocol Support